You are here: Home > CET
All posts from

# TNSF Consortium Tamilnadu MBA / MCA / ME / M.Tech / M.Arch CET 2015 Model Questions Common Entrance Test : tnsfconsortium.org

Organisation : Consortium of Self Financing Professional, Arts and Science Colleges in Tamilnadu
Announcement : Model Questions
Entrance Test : MBA / MCA / M.E / M.Tech / M.Arch., CET 2015 Common Entrance Test

Want to comment on this post?

MBA / MCA / M.E / M.Tech / M.Arch., CET 2015 Common Entrance Test
MODEL QUESTIONS

MBA DEGREE PROGRAMME
SECTION -I: ANALYSIS OF BUSINESS SITUATION
This section contains lengthy passages. Read the passages and also the directions before answering the question that follow the passage, the questions are of two types.
(1) Data evaluation questions.
(2) Data application questions.

This part contains reading passages. You have to read the passages carefully. Each passage will be followed by questions based on its contents. Choose the best answer to each question out of the four probable answers given.

SECTION -III: PROBLEM SOLVING
This part evaluates the skill on solving mathematical problems of graduate level including those learnt in plus two or equivalent level.

e.g.: a is thrice as good a workman as B.B takes 60 days more than A to finish a piece of work.
The time in which they can do it working together is:
(a) 25 days
(b) 30 days
(c) 27 days
(d) 221/2days

SECTION -IV :DATA SUFFICIENCY
Each question will be followed by two statements (a) and (b). Your have to determine whether the data given in the statement are sufficient for answering the questions, use the data given, plus with your knowledge of mathematics and every day facts, to choose your answer.

SECTION -V: ENGLISH USAGE
In each of the sentences below, four words or phrases have been underline. Select the underlined part which contains an error in usage, grammar or punctuation.
e.g.: She informed me that she had been ill for sometimes but that she hoped to be better by summer

MCA DEGREE PROGRAMME
SECTION -I: QUANTITATIVE ABILITY
This section contains mathematical problems of graduate level including those learnt in plus two or equivalent level.
e.g.: The sum of even numbers between 1 and 31 is
(a) 16
(b) 128
(c) 240
(d) 512

SECTION -II: ANALYTICAL REASONING
This part contains problems which would test the analytical capability of the candidate.
e.g.: Find the next number, of 4,7,12,19 __________________
(a) 26
(b) 29
(c) 27
(d) 28

SECTION -III: LOGICAL REASONING
e.g.: If CHINA is written as 38126 and NEPAL, is 25769, how is PLAINE coded?
(a) 971625
(b) 769125
(c) 796125
(d) 679125

SECTION -IV: COMPUTER AWARENESS
e.g.: Which of the following was the first digital computer
(a) UNIVAC
(b) ILLIAC
(c) VAZII/780
(d) ENIAC

SECTION -V: ENGLISH USAGE AND BASIC SCIENCE
This section consists of questions, that evaluate the knowledge of the candidate in English Language. Also questions will be asked on General Sciences

e.g. : Numismatcis is the study of . .
(a) Numbers
(b) Coins and medals
(c) Weights and Measures
(d) Calculators

M.E. / M.Tech / M.Arch Degree Programme
PART 01 – ENGINEERING MATHEMATICS
This section contains mathematical problems of graduate level including those learnt in plus two or equivalent level.

PART 02 – BASIC ENGINEERING AND SCIENCES
e.g.: The moment of inertia of a rectangle about its centroidal axis parallel to the base is 20cm4, the moment of inertia about its base is ________ cm4
(a) 80
(b) 60
(c) 40
(d) 30

PART 03 – CIVIL ENGINEERING AND GEO INFORMATICS
e.g.: If the ratio of modulus of elasticity to rigidity modulus is 2.5 then the ratio of the modulus of elasticity to bulk modulus is
(a) 2.5
(b) 1.5
(c) 0.67
(d) 0.4

PART 04 – MECHANICAL ENGINEERING
e.g.: The resultant of a force acting on a body will be zero if the body?
(a) Rotates with uniform deceleration
(b) Rotates with uniform acceleration
(c) Does not rotate
(d) Rotates

PART 05 – PRODUCTION AND INDUSTRIAL ENGINEERING
e.g. : The __________ process that uses reciprocating motion of the cutter is used in the
manufacture of spur gears.
(a) Gear shaping
(b) Gear hobbing
(c) Gear shaving
(d) Orbital forming

PART 06 – ELECTRICAL, ELECTRONICS AND INSTRUMENTATION ENGINEERING
e.g. : Capacitance of a parallel capacitor will remain unchanged by altering
(a) Area of the plate
(b) Dielectric medium
(c) Thickness of the plates
(d) Distance between the plate

PART 07 – ELECTRONIC AND COMMUNICATION ENGINEERING
e.g. : The input resistance of a JFET is of the order of
(a) 1
(b) 10
(c) 1
(d) 100

PART 08 – COMPUTER SCIENCE ENGINEERING AND INFORMATION TECHNOLOGY
e.g. : In which of the following adder circuits, is the carry look ripple delay eliminated?

PART 09 – CHEMICAL ENGINEERING, CERAMIC TECHNOLOGY & BIOTECHNOLOGY
e.g. : Heat capacity of the substance is the ratio of (dQ = heat transfer, dt = temperature changer)
(a) C = dQ *dT
(b) C = dQ/dT
(c) C = dT/dQ
(d) C = dQ

PART 10 – ARCHITECTURE
e.g. : Sabarmathi ashram designed by
(a) Le Corbusier
(b) B.V. Doshi
(c) Charles Correa
(d) Louis Khan

1 Comment
1. 